Products

Bitumen Emulsion

Do Not Mix Emulsion with Water or Any Other Liquid
Do Not Heat Emulsion
Roll The Emulsion Drums Before Use

Technical Requirements of Bitumen Emulsion (Cationic Type) IS:8887-2004

(Clouses 4.2 & 6.2)

Sr. No. Characteristic Grade of Emulsion
RS-1 RS-2 MS SS-1 SS-2
1 Residue on 600 micron IS Sieve, % mass Max. 0.05 0.05 0.05 0.05 0.05
2 Viscosity by Saybolt Furol Viscometer, Seconds at 25°C / 50°C 20 - 100
100 - 300
50 - 300
20 - 100
30 - 150
3 *1) Coagulation of emulsion at low temperatures. NIL NIL NIL NIL NIL
4 Storage stability after 24 hrs % Max. 2 1 1 2 2
5 Particle charge Positive Positive Positive Weak Positive Positive
6 Coating ability and water resistance
a) Coating, dry aggregate
b) Coating, after spraying
c) Coating, wet aggregate
d) Coating, after spraying
- - Good
Fair
Fair
Fair
- -
7 Stability to mixing with cement (% coagulation) Max. - - - 2 2
8 Miscibility with water (Coagulation) NIL NIL NIL - NIL
9 Test on Residue
a. Residue by Evaporation % Min.
60 67 65 50 60
b. Penetration 25°C/100g/5 sec 80 - 150 80 - 150 60 - 150 60 - 350 60 - 120
c. Ductility 27°C/cm Min. 50 50 50 50 50
d. Solubility in trichloroethylene % Min. 98 98 98 98 98
10 Distillation percent, by volume at:
a. 190°C
b. 225°C
c. 260°C
d. 315°C
- - - 20 - 55
30 - 75
40 - 90
60 - 100
-
11 Water content, percent by mass, Max - - - 20 -

*1) The requirement shall be applicable only under situations where the ambient temperature is below 15°C

Application of Bitumen emulsion Grades in Road Development, Construction & Maintenance
  • Rapid Setting (RS-1): It is recommended for tack coat applications
  • Rapid Setting (RS-2): It is recommended for surface dressing, grouting
  • Medium Setting (MS): It is used for repair work, surface dressing, penetration macadam
  • Slow Setting (SS-1): It is used for prime coat, crack sealing and fog seal
  • Slow Setting (SS-2): It is used for slurry seal, road mixes and for prime coat applications

Choose the best Waste Management & setup of infrastructure related
Solutions for your business

Contact Us

©Copyright 2025. All rights Reserved.